Description Of The Appliance - UFESA CE7151 Manual De Instrucciones

Description of the appliance

M
L
K
F
J
I
A
1.2 l water tank
Removable water tank to facilitate filling up. Lift to remove.
B
Hot water/steam button (switch)
C Steam wand
D
Frothing attachment
A rubber attachment was designed to facilitate making compact, thick froth
from milk in just a few seconds. Always use it for frothing milk.
E Filter holder
F
Filter lock
It is especially helpful when emptying used coffee from the filter as it keeps the
filter in the holder when turning.
G Measuring spoon with tamper
H
1 cup filter, 2 cup filter
I Drip tray
It can be removed to facilitate cleaning.
J
Flow grid
It can be removed to facilitate cleaning.
K Regulator knob
Turn to the left – espresso from the brew head, turn to the right – hot water or
steam from the wand.
L
On/off pilot light
M
On/off button (switch)
N Standby pilot light
Mind that the drip tray (I) will fill up with water in the course of normal
operation. Check it on a regular basis and empty it as and when necessary to
avoid overflowing.
Operation of the control panel
ON/OFF BUTTON (M)
Turn the espresso machine on by pressing button
illuminate in red, and the standby light (N) will start flashing.
Warning: Before turning the espresso machine on, check that the regulator knob (K)
is in position 0 (off).
When the espresso machine is ready to operate, the standby pilot light (N) will
come off.
Warning: Remember that if the standby pilot light (N) flashes, it indicates that the
espresso machine has not reached the right temperature for operation.
To turn the espresso machine off, simply press button
B
N
A
C
D
I
H
F
E
(M). The pilot light (L) will
(M).
Espresso coffee
When the espresso machine is turned on – button
light is illuminated (L)), and the hot water/steam button
out" position
espresso mode.
If the steam function has been used before, set the hot water/steam button
(B) in the "pushed out" position
reached the right temperature, the standby light (N) will stop flashing and will come
J
off. The espresso machine is ready for brewing.
Notice: Place a cup/cups under the brew head.
To brew espresso (turning on the pump), turn the regulator knob (K) anticlockwise
into position . The standby light (N) is illuminated during this process.
To turn off the pump (to stop the coffee brewing/pouring process), re-set the knob
into position 0.
Hot/boiling water
G
When the espresso machine is on – button
illuminated (L)), and the hot water/steam
position (the standby pilot light (N) is not illuminated) – the appliance is in
the hot water mode.
If the steam function has been used before, set the hot water/steam
in the "pushed out" position
the right temperature, the standby light (N) will stop flashing and will come off. The
espresso machine is ready to operate.
Notice: Place a suitable dish under the steam wand (C).
To obtain hot water/steam, turn the regulator knob (K) clockwise into position
The standby light (N) is illuminated during this process. To turn off the pouring of
hot/boiling water, re-set the knob into position 0.
Steam
When the espresso machine is on – button
is illuminated (L)), and the hot water/steam
position (the standby light (N) is not illuminated) – the appliance is in the
steam mode.
If the espresso or hot water function has been used before, set the hot water/steam
button (B) in the "pushed in" position
machine has reached the right temperature, the standby light (N) will stop flashing
and will come off. The espresso machine is ready for the steam function.
To start steam dosing, turn the regulator knob (K) clockwise into position
standby light (N) is illuminated during this process. To turn of steam dosing, re-set
the knob into position 0.
(the standby light (N) is not illuminated) – the appliance is in the
. The moment the espresso machine has
is pushed in (M) (the on/off light is
button (B) is in the "pushed out"
. The moment the espresso machine has reached
is pushed in (M) (the on/off pilot light
button (B) is in the "pushed in"
. The moment the espresso
is pushed in (M) (the on/off
(B) is in the "pushed
button (B)
.
. The