Environmental Protection/Disposal; Electric Tools And Accessories; Basic Safety Instructions - Orbitalum ORBmax Traducción Del Manual De Instrucciones Original

ORBMAx
2.3

environmental protection/disposal

2.3.1

electric tools and accessories

Discarded electric tools and accessories contain large quantities of valuable raw and synthetic materials
that can be recycled. Therefore:
• Electrical (electronic) devices that are marked with the symbol at the side may not be disposed of
with household waste in accordance with EU regulations.
• By actively using the available return and collection systems, you actively contribute to the reuse,
recycling and utilization of electrical (electronic) devices.
• Used electrical (electronic) devices contain parts that must be handled selectively according to
EU regulations. Separate collection and selective treatment is the basis for environmentfriendly
disposal and the protection of human health.
• Appliances and products that you bought from us after August 13, 2005 will be disposed of in
accordance with legal standards after they have been supplied to us at no cost.
• We may refuse to accept old appliances that pose a risk to human health or safety due to contamina-
tion produced during use.
• The end user is responsible for disposing of used appliances introduced to the market before August
13, 2005. Please contact a disposal center near you for this purpose.
• Important for Germany: our products may not be disposed of in municipal disposal sites as
they are only used for industrial purposes.
2.4

Basic safety instructions

The Residual Oxygen Meter (hereinafter referred to as ORBmax) is designed using state-of-the-art technology for safe use. The
risks involved in using the machine are described in the operating instructions below. Using this machine in a way other than that
described in these instructions can lead to serious physical injury and material damage.
Therefore:
• Observe warning messages at all times.
• In addition to these operating instructions the general safety precautions of the welding machines together with which
ORBmax is used apply.
• Store all documentation near the device.
• Generally valid regulations for the prevention of accidents must be observed.
• Observe country-specific regulations, standards and guidlines.
• Use the device only in proper operating order. Observe the maintenance information (chap. 9, p. 41).
• Use the device only when it has a solid footing. Check whether the substrate is able to take sufficient loads.
• Report deviations in operating behavior of the device to the person in charge immediately.
• Use only original tools, spare parts, materials and accessories from Orbitalum Tools.
• Repair and maintenance work on the electrical equipment may only be carried out by a qualified electrician.
• Switch the device off and unplug the power plug before carrying out transportation, cleaning, maintenance and repairs.
• Do not carry the device by the cable and do not use the cable to pull the power plug out of the socket outlet (except in case of
an emergency). Protect the cable against heat, oil and sharp edges (shavings).
[REV. 20190925] OW_ORBmax_BA_882060201_00__INH-02_EN
Information and safety instructions for the responsible body
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
enGLISH
(as per RL 2012/19/EC)
27