Orbitalum ORBmax Traducción Del Manual De Instrucciones Original página 30

enGLISH
Product design
Individual parts for
measuring hose set
Power supply unit set
Interface cable
SD card
Protective cover
Transport case
30
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
All individual parts are already included in the scope of delivery of the
ORBmax.
ARTIcLe
Hose*
Filter housing including filter insert (1 unit)
Filter inserts (5 piece per packing unit)
Test tip
Plastic connector test tip – hose
* Please specify the hose length in meters when ordering.
• 100 - 240 VAC / 12 VDC.
• For connecting the ORBmax to the mains network.
• Including diverse country-specific AC adapters.
• 1 set is already included in the scope of delivery of the ORBmax.
ARTIcLe
Power supply unit set
• For connecting the ORBmax to the ORBIMAT orbital welding power
sources of Orbitalum Tools.
• Can be set at ORBIMAT so that welding can only be started after the
oxygen value has been underpassed.
• Both interface cable are already included in the scope of delivery of
the ORBmax.
ARTIcLe
Interface-Kabel ORBmax - ORBIMAT CA
Interface-Kabel ORBmax - ORBIMAT SW
• 1 Gbyte. For measured data storage.
• Evaluation software "O2_log" included.
• 1 SD card including evaluation software is already included in the
scope of delivery of the ORBmax.
ARTIcLe
SD card (1 GB)
• Practical protective cover that can be converted into a stand when
rolled together on the device rear.
• 1 protective cover is already included in the scope of delivery of the
ORBmax.
ARTIcLe
Protective cover
Robust transport case with degree of protection IP67.
1 transport case is already included in the scope of delivery of the
ORBmax.
ARTIcLe
Transport case
cODe
882 012 010
882 020 003
882 030 002
882 012 011
882 012 012
cODe
882 012 023
cODe
882 012 028
850 040 031
cODe
882 050 007
cODe
882 001 013
cODe
882 050 008
[REV. 20190925] OW_ORBmax_BA_882060201_00__INH-02_EN
ORBMAx