Publicidad
Step 4
å
Push two SAUDER TWIST-LOCK® FASTENERS (37F) into the large
holes in the PANEL (GG).
å
Fill the holes in the edge of the PANEL (GG) 1/4 to 1/2 full with
GLUE (177M). Then, insert the WOOD DOWELS (15F) into the holes.
Wipe away the excess GLUE.
å
Next, fill two holes in the PANEL (GG) 1/4 to 1/2 full with GLUE (177M).
å
Now, fasten the MODESTY PANEL (M) to the PANEL (GG). Tighten
two TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the WOOD DOWELS in the MODESTY PANEL insert
into the PANEL. Wipe away the excess GLUE.
i t h
e w
®
f a c
C K
S u r
- L O
I S T
E R S
T W
T E N
F A S
GG
Page 10
37F
15F
M
427163
Fill the holes 1/4 to 1/2 full with GLUE.
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
GG
Meet Part (GG). This component
has been engineered to be
lighter, stronger, faster... well
ok. Not technically faster. But
definitely makes for a sturdier
L-Desk that' s easier to assemble
and friendlier to the environment.
For support, place packing
foam and magazines here.
2
177M
Caution
www.sauder.com/service
Publicidad
