Publicidad
Step 41
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D133 and D139).
å
Fasten two EXTENSION SLIDES (40NC) to the DRAWER SIDES (D133 and D139). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten two PULLS (191K) to the DRAWER FRONT (K). Use four BLACK 7/8" MACHINE SCREWS (37S).
2
3
191K
191K
BLACK 7/8" MACHINE SCREW
(4 used for the PULLS)
www.sauder.com/service
Open end
1
D139
K
37S
10A
D133
3S
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
427163
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
2
3
Drawer Slide
Center the screw in the oval hole.
7
Open end
1
Page 47
Publicidad
