Tabla de contenido
Publicidad
Step 15
å
First, fill two holes in the LEFT LONG MOLDING (P) 1/4 to 1/2 full
with GLUE (177M).
å
Then, fasten the LEFT UPRIGHT (B) to the LEFT LONG
MOLDING (P). Tighten two TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the WOOD DOWELS in the UPRIGHT insert into
the MOLDING. Wipe away the excess GLUE.
å
Now, fasten the LEFT UPRIGHT (B) to the MODESTY PANEL (M).
Use two BLACK 2-9/16" FLAT HEAD SCREWS (147S).
å
NOTE: Start each SCREW a few turns before completely
tightening any of them.
The BRACKET
must be here.
www.sauder.com/service
M
B
P
427163
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
147S
BLACK 2-9/16" FLAT HEAD SCREW
(2 used in this step)
2
Page 21
Publicidad
Tabla de contenido
