Publicidad
Step 25
å
Push four SAUDER TWIST-LOCK® FASTENERS (37F) into the large
holes in the RIGHT END (A) and RIGHT UPRIGHT (D).
å
Fill the holes in the RIGHT END (A) and RIGHT UPRIGHT (D) 1/4 to
1/2 full with GLUE (177M). Then, insert the WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
Do not tighten the TWIST-LOCK® FASTENERS in this step.
15F
www.sauder.com/service
D
427163
2
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
Parts (A) and (D). Even
more components that are
sturdier, easier, and friendlier!
A
37F
Page 31
Publicidad
