Kärcher BDS 43/Orbital C Spray Manual De Instrucciones página 6

16DO NOT LEAVE UNATTENDED
while Machine is running.
17DO NOT USE IF CORD, PLUG OR
MACHINE IS IN POOR CONDI-
TION. If the Appliance has been
dropped, damaged, exposed to
weather, or dropped into water;
have it checked by an authorized
service.
18ALWAYS USE EYE PROTECTION
when operating the machine.
19USE EXTRA CAUTION when oper-
ating on stairs.
20STAY ALERT! Do not use the ma-
chine when you are tired or under
the influence of drugs, alcohol or
medication.
SAVE THESE INSTRUCTIONS
This appliance is intended for com-
mercial use.
GROUNDING INSTRUCTIONS
● This appliance must be grounded. If
it should malfunction or break down,
grounding provides a path of least
resistance for electric current to re-
duce the risk of electric shock.
● This appliance is equipped with a
cord having an equipment ground-
ing conductor and ground plug.
● The plug must be inserted into an
appropriate outlet that is properly in-
stalled and grounded in accordance
with all local codes and ordinances.
To comply with the National Electrical
Code(NFPA 70) and to provide addi-
tional protection from the risk of electric
shock, this appliance should only be
connected to a receptacle that is pro-
tected by a ground fault circuit inter-
rupter (GFCI).
WARNING:
● Improper connection of the equip-
mentgrounding conductor can result
in a risk of electric shock.
6
● Check with a qualified electrician or
service person if you are in doubt as
to whether the outlet is properly
grounded.
● Do not modify the plug provided with
the appliance.
● If it will not fit the outlet, have a prop-
er outlet installed by a qualified elec-
trician.
● This appliance is for use on a nomi-
nal 120-volt circuit, and has a
grounded plug that looks like the
plug illustrated in Fig.A.
● A temporary adapter that looks like
the adapter illustrated in Fig.B, may
be used to connect this plug to a
two-pole receptacle as shown in
Fig.B, if a properly grounded outlet
is not available.
● The temporary adapter should be
used only until a properly grounded
outlet (Fig.A) is installed by a quali-
fied electrican.
● The green colored rigid ear, lug, or
the like extending from the adapter
must be connected to a permanent
ground such as a properly grounded
outlet box cover.
● Whenever the adapter is used, it
must be held in place by a metal
screw.
IN ALL CASES, MAKE SURE THE
RECEPTACLE IN QUESTION IS
PROPERLYGROUNDED.
NEVER REMOVE GROUNDING
PRONGFROM POWER PLUG.
EXTENSION CORDS
Use only three-wire extension cords
that have three-prong grounding-type
plugs and three-pole receptacle that
accepts the appliance's plug. Replace
damaged or worn cord immediately.
DO NOT ATTEMPT TO REPAIR
POWERCORD.
Figure A
English