Tools And Parts; Parts Not Supplied - arietta Dekor Glass Guía De Instrucciones Para Instalación

Tools and Parts

Parts supplied
Removing the packaging
I
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
Supplied Part
Hood assembly and
LED lamps already installed
5x45 mm
5.4x75 mm
3.5x9.5 mm
4x8 mm
Torx 10 adapter

Parts not supplied

Tools/Materials required
• Level
• Drill
• 11⁄ " (3.2 cm), 1⁄ " (3.2 mm), and 1⁄
4 8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers:
- Flat-blade
- Phillips
Pieces
1
6
4
2
4
1
" (4.8 mm) drill bits
16
I WARNING!
Remove the protective film covering the product before putting
into operation.
Supplied Part
Duct covers
6" round air transition
8x40 mm
10x60 mm
Duct cover bracket
Mounting template
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system
3
Pieces
2
1
2
4
1
1