Tools And Parts; Parts Not Supplied - arietta ALZ430SSA Guía De Instrucciones Para Instalación

Tools and Parts

Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
• Hood assembly with blower and LED lamps already installed.
• 6" (15.2 cm) round air transition
• Grease filters
• Hardware bag with:
Part Qty
4
5x45 mm
4
4.5x13 mm
2
3.5x9.5 mm
1
Torx 10 adapter
Tools/Materials required
• Level
• Drill with 1¼" (3.2 cm), ⁄ " (3.2 mm), and
1
8
drill bits
• Pencil
Part Qty
1
Torx 20 adapter
4
10 x 60 mm wall
anchors
4
5.4x75 mm screws
(for 10x60 mm wall
anchors)
⁄ " (4,8 mm)
1
16
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdrive
r
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system

Parts not supplied

Optional Accessories
Kit # Part
No Return KIT0102873
Valve
Duct Cover 30" KIT01941
6" height
36" KIT01942
CFM KIT02748
Reduction
3
Kit # Part
Recirculating 30" KIT01939
36" KIT01940
Duct Cover 30" KIT01944
12" height
36" KIT01945
Grease KIT01668
Filter