Tools And Parts; Parts Not Supplied; Dimensions And Clearances - arietta Argo Guía De Instrucciones Para Instalación

Tools and Parts

Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
• 1 - 30" x 12" (76.2 x 30.5 cm) face panel with LED lights
already installed.
• 6" (15.2 cm) round air transition.
• 2 - Aluminum mesh filter.
• 2 - Mounting brackets.
• 2 - Metal spacers (for use when cabinet depth is greater than
12")
• Hardware package with:
Part Qty
2
4.2 x 15 mm
8
4.5 x 13 mm
6
3.5 x 9.5 mm
4
3.5 x 9.5 mm
Tools/Materials required
• Level
• Drill with 1¼" (3.2 cm),1⁄8" (3.2 mm), and 1⁄16" (4,8 mm) drill
bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Metal snips
• Screwdriver:
- Phillips
- Flat-blade
Parts needed
• 1 wall or roof cap
• Metal vent system
Part Qty
8
4.2 x 19 mm
1
Torx 10 adapter
8
Ø 6.4x18 mm washers
8
Ø 4.2x12 mm washers

Parts not supplied

Optional Accessories
Kit # Part
Stainless 30" KIT02773
Hood liner
36" KIT02774
CFM
Reduction KIT02748
Kit
Dimensions and
Clearances
B
A
I* - Metallic spacers
Spacers has to be installed
and used when cabinet depth
is greater than 12".
AAR428SSB / AGR628SSB
A
B
C
D
E
F
G
H
I
3
Kit # Part
Recirculating KIT02770
H
G
F
E
D
C
I*
28 ⁄ " (71.8 cm)
1
4
26" (66 cm)
1 ⁄ " (2.9 cm)
1
8
10¾" (27.3 cm)
9½" (24.2 cm)
⁄ " (.85 cm)
5
16
14 ⁄ " (37 cm)
9
16
6" (15.2 cm)
½" (1.27 cm)
I*