Tools And Parts; Parts Not Supplied - arietta Veneto Guía De Instrucciones Para Instalación

Tools and Parts

Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
Part
Hood assembly and LED lamps already installed
Duct covers
Torx 10 adapter
10x60 mm wall anchors
8x40 mm wall anchors
5.4x75 mm
5x45 mm
3.5x9.5 mm
4x8 mm
6" round air transition
Duct cover bracket
Mounting template
Tools/Materials required
• Level
• Drill with 1¼" (3.0 cm),
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
Qty
• Metal snips
• Screwdriver
- Phillips screwdriver
- Flat-blade
1
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
2
• Metal vent system

Parts not supplied

Optional Accessories
1
CFM Reduction
4
Long Chimney
Extension Kit
2
(9´ to 12´
Ceiling)
4
6
2
2
1
1
1
3
⁄ " (3.0 mm), and
1
1
8
Kit # Part
Recirculating
KIT02748
Kit Kit
6" Round
KIT02762 Backdraft
Damper Kit
⁄ " (4,8 mm) drill bits
16
Kit # Part
KIT02766
KIT02721A
KIT0102873