Fronius Symo Advanced 10.0-3 208-240 Manual De Instrucciones página 23

S t a n d b y
W i F i A c c e s s P o i n t
D A T C O M
U S B
C l o c k
The inverter establishes the WLAN Access Point. The WLAN Access Point stays
open for one hour. The IP switch on the Fronius Datamanager 2.0 can remain in
switch position B by activating the WLAN Access Point.
Installation via Solar.start App
Download Fronius Solar.start app
4
Run Fronius Solar.start App
5
The start page of the Setup wizard appears.
Installation via Web Browser
Connect the end device to the
4
WLAN Access Point
SSID = FRONIUS_240.xxxxx (5-8
digits)
- Search for a network with the
name "FRONIUS_240.xxxxx"
- Establish a connection to this
network
- Enter password 12345678
(or connect end device and invert-
er via Ethernet cable)
Enter in the browser:
5
http://datamanager
or
192.168.250.181 (IP address for
WLAN connection)
or
169.254.0.180 (IP address for
LAN connection)
23