Optika Italy B-510 Serie Manual De Instrucciones página 9

• The microscope is delivered with two condensers: one
for brightfield and one for darkfield. Select the suitable
condenser for the observation mode desired.
5. Lower the condenser holder using the height condenser
knob ①. (Fig. 5)
6. Insert the condenser round dovetail in the condenser holder.
(Fig. 6)
7. Tight the condenser locking screw ②. (Fig. 7)
8. (Only for darkfield condenser)
Connect the condenser jack to the connector on the right
side of the frame. (Fig. 8)
• When the condenser plug is connected, the light coming
from the microscope LED goes out and the internal
condenser LED turns on.
①
BF
②
Page 9
F ig. 5 F ig. 5
DF
F ig. 6 F ig. 6
F ig. 7 F ig. 7
F ig. 8 F ig. 8