Cameo S4 IP Manual De Usuario página 21

STANDALONE MODE 'DIRECT LED' (RGBW colour mixing)
Starting from the main display, press the left push button rotary encoder to access the menu for
selecting the mode. Turn the left encoder (SELECT) to choose Direct LED (see left arrow) and
confirm by pressing the left encoder (ENTER). Now adjust the overall brightness (DIM) and the
intensity of R, G, B and W using the three rotary-push encoders (see illustration).
Rotate encoder =
Set overall brightness (DIM)
Press encoder =
Mode selection
STANDALONE MODE 'COLOUR COORDINATES'
Starting from the main display, press the left push button rotary encoder to access the menu for
selecting the mode. Rotate the left encoder (SELECT) to choose Colour Coordinates (see left
arrow) and confirm by pressing the left encoder (ENTER). The overall brightness (DIM) and the x
and y coordinates can now be set using the three rotary-push encoders (see illustration).
Rotate encoder =
Set overall brightness (DIM)
Press encoder =
Mode selection
Rotate encoder =
Set brightness of R or B
Press encoder =
Switch between R+G and B+W (Next Colours)
Rotate encoder =
Set digits 3 and 4 after the decimal point
Press encoder =
Open the main menu (Menu)
Rotate encoder =
Set digits 1 and 2 after the decimal point
Press encoder =
Switch between x and y
(Next coordinate)
Rotate encoder =
Set brightness of G or W
Press encoder =
Open the main menu (Menu)
21