General Use Instructions; Specifications; Typical Full Load Sizes - Maytag MAT20PDFGW Instrucciones

n Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual. You
must also understand these instructions and have the skills to
carry them out.
n See "Electrical Requirements" for grounding instructions.
n Water pressure of 138 kPa–690 kPa (20 psi–100 psi)
is needed for operation of the washer.
n Use new hoses supplied with the washer. Do not reuse old hoses.
n If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons in
order to avoid a hazard.

SPECIFICATIONS

These units are sold in multiple regions with difference requirements.
Below are a few of the valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reflects a minimum threshold for dry volume
capacity that is needed for import tariff purposes.
IEC Capacity: A capacity measure that represents the maximum capacity of dry linens and
textiles which the manufacturer declares can be treated in a single cycle.

TYPICAL FULL LOAD SIZES

Load Type
Mixed Load
Permanent Press
4
SAVE THESE INSTRUCTIONS
(10.5 kg maximum load size)
Loading Suggestion
3 double sheets
4 pillowcases
6 pair shorts
8 T-shirts
2 shirts
2 blouses
8 handkerchiefs
2 double or 1 king size sheet
1 tablecloth
1 dress
1 blouse
2 slacks
3 shirts
2 pillowcases
n IEC capacity: 10.5 kg.
n Washer installation and service must be performed by a Maytag
authorized service person.
n Only authorized spare parts shall be used when replacing any
component.
n Do not use an extension cord or an electrical portable outlet device.
n Water heater set to 49°C (120°F).
Dry Linen Capacity
10.5 kg (23 lbs)
IEC Capacity
10.5 kg (23 lbs)
Sound Level
Lpa: 58 dB(A) (KPa +/- 10 dB(A))
Load Type
Heavy Work Clothes
Knits
Loading Suggestion
3 pair pants
3 shirts
1 coverall
4 pair jeans
1 overall
3 blouses
4 slacks
6 shirts
4 tops
4 dresses