m
IMPORTANT!
u
You must fully assemble the product before
using it for the first time!
m
WARNING!
Always pull the power plug before
making adjustments to the product.
Unfolding the shaft
(Fig. C)
Unlocking: Set the folding hinge lock
the
position.
13 ]
[
Hold the shaft
and unfold the front
part until the folding hinge lock
engaged.
Locking: Set the folding hinge lock
the
position.
Attaching the telescopic
extension shaft
(Fig. D)
NOTE
u
The telescopic extension shaft
for rooms with high ceilings.
Unlocking: Fold up the lock lever
Insert the telescopic extension shaft
14 ]
[
the connector
(on the main handle
Adjust the length.
NOTE
u
u
u
[
11 ]
to
Locking: Fold down the lock lever
Connecting the vacuum hose
11 ]
[
is fully
(Fig. E, F, G)
m
11 ]
[
to
NOTES
22 ]
[
is suitable
u
[
21 ]
.
[
22 ]
into
[
20 ]
) .
u
Insert the hose coupler
connector
The maximum length is indicated on the
telescopic extension shaft
Pulling the telescopic extension shaft out
[
20 ]
: The Max marking
of the main handle
must remain hidden inside the main
handle or be aligned with the edge of the
14 ]
[
connector
.
Do not pull the telescopic extension shaft
out further.
WARNING!
Always wear a dust mask when
sanding. Using this product generates a
large amount of dust. Harmful dust may
be generated when sanding surfaces
coated with lead-based paint.
Attach an external dust extraction
unit (e.g. vacuum cleaner) to the hose
29 ]
[
[
30 ]
adaptor
(at the end of the vacuum
28 ]
[
hose
) . In this way, you protect yourself
as well as persons in the vicinity from dust
and you keep the workplace clean.
You may connect the vacuum hose
14 ]
[
the connector
on the main handle
24 ]
[
to the connector
on the rear handle
[
26 ]
[
14 ]
24 ]
[
/
, until it is fully engaged.
[
22 ]
.
21 ]
[
.
28 ]
[
to
20 ]
[
or
[
23 ]
.
into the
GB/MT
83