Husqvarna MADSAW 525iDEPS Powerhead Manual De Usuario página 10

• Use sturdy non-slip boots.
• Use clothing made of a strong fabric.
Always use heavy, long pants and long
sleeves. Do not use loose clothing that can
catch on twigs and branches. Do not wear
jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above
shoulder level.
• Keep first aid equipment close at hand.
Safety devices on the product
WARNING:
instructions that follow before you
use the product.
In this section the product's safety features,
its purpose and how checks and maintenance
should be carried out to ensure that it
operates correctly. See instructions under
Product overview on page 2 to
the heading
find where these parts are located on your
product.
The life span of the product can be reduced
and the risk of accidents can increase
if product maintenance is not carried out
correctly and if service and/or repairs are not
carried out professionally. If you need further
information please contact your nearest
servicing dealer.
WARNING:
with defective safety components.
The product's safety equipment
10
Read the warning
Never use a product
must be inspected and maintained
as described in this section. If your
product fails any of these checks,
contact your service agent to get it
repaired.
CAUTION:
repair work on the machine
requires special training. This is
especially true of the machine's
safety equipment. If your machine
fails any of the checks described
below you must contact your
service agent. When you buy any
of our products we guarantee the
availability of professional repairs
and service. If the retailer who sells
your machine is not a servicing
dealer, ask him for the address of
your nearest service agent.
To do a check of the user interface
1. Press and hold the start/stop button (A).
A
a) The product is on when the display (B)
comes on.
b) The product is off when the display
goes off.
2. If the warning indicator on the display is on
or flashes, refer to
To do a check of the power trigger lockout
The power trigger lockout is designed to
prevent accidental operation. When you push
the power trigger lockout forward (1) and then
press the power trigger lockout against the
handle (2), the power trigger (3) is released.
When you release the handle, the power
trigger and the power trigger lockout both
move back to their original positions. This
All servicing and
B
Keypad on page 27 .
1824 - 004 -