Troubleshooting - Husqvarna MADSAW 525iDEPS Powerhead Manual De Usuario

Turn the adjustment screw for the oil pump.
Use a screwdriver or a combination wrench.
• Turn the adjustment screw clockwise to
decrease the oil flow.
Keypad
Problem
Green start LED
flashes.
Red error LED
flashes.
The product does
not start.
Red error LED
comes on.
Battery
LED display
Green activate LED flash-
ing
1824 - 004 -

Troubleshooting

Possible faults
Low battery voltage.
Overload.
Temperature deviation.
The power trigger and the start but-
ton are pushed at the same time.
Dirt in the battery connectors.
It is necessary to do servicing on the
product.
Possible faults
Low battery voltage.
• Turn the adjustment screw
counterclockwise to increase the oil flow.
Possible solution
Charge the battery.
The cutting attachment is blocked.
stop the product. Remove the bat-
tery. Clean the cutting attachment
from unwanted materials. Loosen the
chain.
Let the product become cool.
Release the power trigger and push
the start button.
Clean the battery connectors with
compressed air or a soft brush.
Speak to your servicing dealer.
Possible action
Charge the battery.
27