Ambu aView 2 Advance Instrucciones De Uso página 17

5.1.4. Import network certificate for WPA2
Enterprise authentication:
• In the Network menu, scroll to Imported
Network certificates 14 .
To import TLS certificates from a server:
• Ensure that the displaying unit is connected
to a temporary Wi-Fi or LAN network
(see section 5.1.2. or 5.1.3.).
• Press Server import.
• Press the input field next to Certificate file
name 15 and enter the file name.
• Press the input field next to Host name 16 and enter the hostname.
• Press the input field next to Port number 17 and enter the port number.
• Press Import 18 .
To import network certificates from a USB flash drive:
• Ensure that USB connection has been enabled for certificate import (see section 4.3.)
and a USB flash drive connected to the displaying unit (see section 2.3.).
• Press USB import and wait while the displaying unit searches for network certificates on the
USB flash drive.
• Select the required network certificate and press Import 19 .
Note: When the network certificate has been imported, the name of the certificate file is shown below
Imported Network certificates in the Network menu.
5.1.5. Set up static IP address and/or DNS server
for a Wi-Fi or LAN network:
• In the Network menu, press the currently selected
Wi-Fi network.
• Below the name of the Wi-Fi network, press the
arrow next to IP address.
Press the ON/OFF slider next to Enable static IP 20
or Configure manual DNS servers 21 (switch to
green) and enter the required information.
18
15
16
17
19
14
20
21
17