Installation; Unpacking And Installation - Soehnle Professional 6831 Instrucciones De Manejo

4. Installation

4.1 Unpacking and installation

1. Scale body
Take all scale parts out of the carton and put them on a flat and hard surface.
Follow below procedures in order to fulfill the installation.
2. Pull the leading wire preset inside the handrail and connect the socket with the
plug located at the scale body (P1-2).
20
4. Installation
3. Place the indicator bracket and fix it with screws as per P2-1.
4. After fixation, pull the cable socket through the indicator bracket and connect
it with the indicator plug, then locate backside of the indicator bracket and fix it
by screws (P2-2).
21