Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7.0 - TRANSPORT, STORAGE AND DISPOSAL
• During transport the material needs to be handled with care, avoiding any impact or vibrations to the device;
• If the product has any surface treatments (ex. painting, cataphoresis, etc) it must not be damaged during transport;
• The transport and storage temperatures must observe the values provided on the rating plate;
• If the device is not installed immediately after delivery it must be correctly placed in storage in a dry and clean place;
• In humid facilities, it is necessary to use driers or heating to avoid condensation;
• At the end of its service life, the product is to be disposed of in compliance with the legislation in force in the country where
this operation is performed.
8.0 - WARRANTY
The warranty conditions agreed with the manufacturer at the time of the supply apply.
For damage caused by:
• Improper use of the device;
• Failure to observe the requirements described herein;
• Failure to observe the regulations pertaining to installation;
• Tampering, modification and use of non-original spare parts;
are not covered by the rights of the warranty or compensation for damage.
The warranty also excludes maintenance work, other manufacturers's assembling units, making changes to the device and
natural wear.
9.0 - RATING PLATE DATA
The rating plate data (see example provided here) includes the following:
• Manufacturer's name/logo and address (possible distributor name/logo)
• Mod.:
= device name/model followed
• Cl. A
= Seal strength in counterflow at 150 mbar in accordance with EN 161
• Gr. 2
= Mechanical resistance group 2 in accordance with EN 161
• EN 161
= Product reference regulation
• P.max or PS max
= Maximum pressure at which product operation is guaranteed
• TS
= Temperature range within which product operation is guaranteed
•
(if it is present) = Conformity with PED Dir. followed by Notified Body No.
•
= In compliance with ATEX followed by the protection mode
• year
= Year of manufacture
• Lot
= Product serial number (see explanation below)
• U1804
= Lot issued in year 2018 in the 4th week
• 2185
= progressive job order number for the indicated year
• 00001
= progressive number referring to the quantity of the lot
EV(F)-1 EEX
by the connection diameter
Mod: EV-1 DN 50 EEX
CI.A GR.2 EN 161
year: 2018
14
Madas Technical Manual - 1|1.6a - REV. 0 of 10
PS max=PS= 1 bar
TS: -20...+60 °C
0497
Lot: U1804
2185/00001
Dec 2021
th
Publicidad
Tabla de contenido
