cecotec bongo A Serie Manual De Instrucciones página 29

ENGLISH
P2: Activate and deactivating cruise speed.
P3: Activating and deactivating start up with kick off (foot).
Riding modes:
To select Eco mode, turn on the display and press the menu button until the white D and red D
symbols disappear from the right side of the display.
To select Comfort mode, turn on the display and press the menu button until the white D
symbol appears in the right side of the display.
To select Sport mode, turn on the display and press the menu button until the red Dsymbol
appears in the right side of the display.
Cruise speed
This mode can be activated or deactivated. To do so, hold down both buttons until P0 is
displayed. Then, press the menu button until you select P1. Once you have selected P1, enter to
the function (cruise speed) and select 1 (deactivated) or 0 (activated).
To confirm, press both buttons and return to the home display.
Automatic start
Automatic start can be activated or deactivated. To do so, hold down both buttons until P0 is
displayed. Then, press the menu button until you select P2. Once in P2, access to the function
(automatic start) and choose 1 (activated) or 0 (deactivated). To confirm, press both buttons
and return to the home display.
Speed measuring unit
Speed can be measured in km/h (0) or in miles/hour (1). To change it, go to menu P0 of the on
board computer.
How to ride the scooter
Fig. 29
Press the power push button for 2 seconds.
Fig. 30
Stand on the footrest with one foot and push off with the other to start sliding.
Fig. 31
Place both feet on the footrest.
Fig. 32
Press the throttle push button with your righthand and rotate the handle towards your body.
Press the throttle push button to speed up.
Warning: Do not ride too fast.
Fig. 33
Press the brake to stop or decrease speed.
Press the rear fender with the foot to assist the braking process.
29
BONGO SERIE A