Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3.4 Safety devices applied to the coffee grinder
All grinder-dosers produced by Fiorenzato M.C. S.r.l. are equipped with
adequate mechanical and electromechanical devices designed to protect the
safety of the user and the integrity/functionality of the appliance during its
use.
The coffee grinder-dosers F4 EVO are equipped with the following safety devices:
•
Motor thermal protector
The motor of the appliance has a thermal protector that protects it from excessive
heating due to overcurrents and intervenes by interrupting the power supply of
the motor following the rule of "50 sec ON" / "60 sec OFF" (every 50 seconds of
continuous operation, an obligatory stop of the motor is commanded equal to 60
seconds).
•
Anti-intrusion mushroom on the
coffee supply hopper (Fig. 3)
The anti-intrusion mushroom (Item
1) present inside the supply hopper
(Item 2) allows the passage of coffee
beans towards the grinding chamber,
preventing the accidental introduction
of fingers by the operator.
3.5 Residual risks
During the design Fiorenzato M.C. S.r.l. adopted all the necessary precautions to
ensure use of the coffee grinder-doser in conditions of maximum safety. However, during
installation, cleaning and maintenance of the appliance, there are a number of residual
risks that cannot be eliminated, the effects of which can be addressed by adequately
training the user according to the provisions set out in the following table.
For each residual risk, the provisions useful to limit and/or cancel the degree of the
individual risks are indicated.
14 / 44
1
2
Fig. 3
Fiorenzato | Series F4 EVO_00 Ed. 06/2022
F4 EVO
Publicidad
