EN
4
INSTALLATION
ATTENTION! Before proceeding with installation and commissioning of the
appliance, read the following carefully.
4.1 Storage
In the event that the appliance is not immediately installed in the place of use and it is
necessary to temporarily store it, it should be stored in a safe place that respects the
following characteristics:
•
the place chosen for the temporary storage of the device is a closed environment,
protected from the sun and from weathering;
•
the temperature of the storage place is between 5C° and 40°C, with relative humidity
of between 30% and 90%;
•
if the appliance must remain in storage for a long time before being installed, it is
advisable to keep it in its original packaging to ensure more adequate protection.
4.2 Choice of installation point
Considering the function of the grinder-doser, it is advisable to PLACE IT near the coffee
machine.
Before proceeding with installation of the device, also make sure that the installation
point meets the following requirements:
•
The surface intended for positioning of the appliance must be flat, well levelled and
sufficiently robust to support its weight;
•
The space available must be large enough to allow correct installation and easy use
of the appliance;
•
The appliance must not be installed near sinks and/or taps that can wet it with jets
and/or splashes of water;
•
The place of use is sufficiently lit and well ventilated;
•
A socket is provided near the installation point for the electrical connection of the
appliance in compliance with the regulations in force in the country of use.
ATTENTION! The socket must be equipped with an efficient earthing system.
ATTENTION! The electrical power supply system must also be equipped with
a safety magnetothermic switch placed upstream of the socket in a known
position that can be easily reached by the operator in order to protect the
appliance from overloads and sudden changes in voltage and the user from
the risk of electrocution.
16 / 44
Fiorenzato | Series F4 EVO_00 Ed. 06/2022
F4 EVO