F4 EVO
7
ANOMALIES - CAUSES - REMEDIES
The table shows the possible anomalies that can cause the coffee grinder-doser to
malfunction and/or not to work properly. For each anomaly, the possible cause that
generated it and the actions to be taken to restore correct functioning of the appliance
are indicated.
Anomaly
The coffee grind-
er-doser does not
turn on.
Coffee beans do
not descend from
the supply hopper.
When turned on,
the system loses
the data of the pre-
vious settings.
The "
" icon
appears
on
the
display as an Alert
message signalling
the need to replace
the grinders
Fiorenzato | Series F4 EVO_00 Ed. 06/2022
Cause
No electric power.
Shutter closed.
Machine management
system spare battery
flat.
The grinders are reach-
ing the limit of working
hours set by the man-
ufacturer and it will
therefore be necessary
to plan for their replace-
ment.
Solution
•
Make sure that the switch is in
the "I" (ON) position;
•
Make sure that the circuit
breaker upstream of the socket
(if present) is in the ON position.
•
Make sure that the power ca-
ble is undamaged and correct-
ly connected to the electrical
socket envisaged in the place
of use.
•
Open the shutter.
•
Contact the after-sales service
to replace the spare battery.
•
It is possible to continue to use
the coffee grinder-doser until
the set time limit is reached.
When the limit is reached, to
ensure maximum efficiency of
the machine, it is necessary to
replace the grinders following
the instructions provided in the
paragraph 6.1.5.
•
After replacement, the special-
ist technician resets the working
time counter of the grinders.
EN
39 / 44