LAVAZZA blue CLASSY CUSTOM MILK Instrucciones De Empleo página 49

TEMPERATURE BOOST
If you wish a hotter coffee, you can increase
the beverage temperature by pressing the
TEMPERATURE BOOST button
The machine will emit an acoustic signal
and the button brightness will increase to indi-
cate the activation of the TEMPERATURE
BOOST .
If you wish to go back to the standard tempera-
ture, press the TEMPERATURE BOOST
again.
The button brightness will get low again and the
machine will emit an acoustic signal
cate the deactivation of the TEMPERATURE
BOOST
The temperature CANNOT be changed
during the supply phase.
PREPARING THE COFFEE
.
to indi-
POWER SUPPLY CUT-OFF
If, during the dispensing cycle power supply is
interrupted proceed as follows:
- restore the power supply;
- press the ON/STAND-BY
for the button to light up to a steady white
light;
- lift the capsule loading lever to unload the
exhausted capsule.
- replace the capsule inside the capsule fit-
ting compartment with a new one;
- restart the coffee dispensing.
"NO WATER" WARNING LIGHT
If, during the supplying cycle, the orange
warning light indicating the lack of water in
the tank comes on, proceed as follows:
- fill the water tank up to the indicated MAX
level;
- press the selected button again to keep on
supplying.
EN
and wait
49