Dogtra PATHFINDER2 Serie Guía De Utilización página 37

Sending Commands
1. Select the device from map or list view.
2. Select Nick or Constant and set the stimulation level from 1 to 100, which can
be set for each dog.
3. You can also send commands such as Light, Tone, or Pager.
GPS Connector's Function Button
The last used e-collar command will be color selected in the app. The Function
Button on the GPS connector will operate the last selected command on the last
selected collar. Keep in mind that if the Lock is on in the app, the GPS connector
Function button will be locked too.
Notes:
The E-Collar tab is disabled when the Tracking Only Mode is turned on in the
Settings menu. Dogs are not displayed when hidden or offline.
70
Setting for the GPS Connector's Function Button
Press the 'GPS Connector Function Button Setting' icon on the E-Collar tab to
arrange the stimulation type through the GPS Connector's Function button. This
setting page is ideal when you want to change the stimulation type and level
without commanding the GPS Receiver.
: Function Button Setting
Notes:
The arranged stimulation type and/or level from this page will apply to both
on the app and GPS Connector. You cannot have two different stimulation
types arranged for the PATHFINDER2 app and GPS Connector.
71