Dogtra PATHFINDER2 Serie Guía De Utilización página 38

4-5. FENCE TAB
The PATHFINDER2 offers three types of fences for you to either receive a
notification of your dog crossing boundaries or to auto-correct your dog.
The types of fences included are:
1. Mobile-Fence: A fence setup that moves based upon your smartphone
location and will send you a notification.
2. Geo-Fence: A static fence setup that will send you a notification.
3. E-Fence: A static fence setup that will send your dog an auto-correction and
send you a notification.
1) Mobile-Fence (Notification Only)
- Mobile-Fence is created with a radius centered around your smartphone
(the blue point on the map).
- Status: Indication of receiver in or out of the fence.
- Count: Number of times the receiver has crossed the fence.
- Set the radius from 10 to 2,000 metres.
- Set the Mobile-Fence Alarm settings by going to MENU
MOBILE-FENCE.
Notes:
• The Mobile-Fence gives a notification on the smartphone, but does not
auto-correct the e-collar.
• The automatic e-collar correction will only work on the E-Fence.
72
SETTING
2) Geo-Fence (Notification Only)
- Create Geo-Fences for specific areas to get alerts
on your device.
- Status: Indication of receiver in or out of the fence.
- Count: Number of times the receiver has crossed
the fence.
- Set the Geo-Fence Alarm Setting by going to
MENU
Notes:
• The Geo-Fence gives a notification on the
smartphone, but does not auto-correct the
e-collar.
• The automatic e-collar correction will only
work on the E-Fence.
Setting up a Geo-Fence
1. Press the button.
2. Move the map and place the on the desired area.
3. Click 'Drop Point' to create a point for the fence boundary, then repeat this
step to drop the next point.
4. Press Undo to delete the last point.
5. Click the save button on the top right.
- You can create up to 15 Drop Points and up to 15 Geo-Fences.
- Edit and delete file names and fence locations in the Fence List.
SETTING GEO-FENCE.
73