Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT MAINTENANCE
1. CHARGING THE PATHFINDER2 SERIES
Fully charge the PATHFINDER2 series GPS Connector and Receiver before the
first use. The PATHFINDER2 series uses lithium polymer batteries.
• Only use official Dogtra chargers with the PATHFINDER2 series devices.
• Do not charge the PATHFINDER2 series devices near flammable substances.
• Fully charge the PATHFINDER2 series devices if storing for 1 month or longer.
When to Charge
• When the LED is red on the GPS connector or receiver.
• When the app displays low battery for the GPS connector or GPS receiver.
• When the LED on the transmitter or receiver will not turn on.
How to Charge
1. Connect the charger to the GPS connector and receiver using the
splittercable.
2. Plug the charger into a 220-volt outlet.
3. When fully charged, detach the cables and plug the rubber caps over
thecharging ports on the GPS connector and receiver.
4. The LED will display red while charging and green when the unit is
fullycharged. A depleted battery requires 3.5 hours to fully charge.
86
Splitter Cable
Do not use more than one splitter cable with a single battery charger.
Charger Info
Manufacturer : E-SUN
Manufacturing country : CHINA
Model name : MKC-0502500SEUU
INPUT : 100-240V~50/60Hz 0.4A / Output : 5V 2500mA 12.5W
87
Publicidad
