Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Symbols and Their Meanings
Symbols used in the installation manual are as follows.
Important information or useful usage tips
WARNING: Conditions that may damage
the product or its operating functions
ATTENTION: Conditions containing serious
injury risk
Conditions containing electric shock risk
Packaging materials of the product have
been
materials in
accordance with our National Environment
Regulations.
Disposing the packaging materials
The package has been designed to protect the product during
transport.
The packaging materials used for the product do not harm the
nature during disposal and they need to be recycled.
All plastic packaging materials, bags etc. must be disposed
safely and kept out of the reach of children.
Please return the packaging to your dealer.
WARNING
This installation manual has been prepared to help installation
teams. The User Manual provided with the product must also
be taken into consideration.
You may get seriously injured and your product may get
damaged if you ignore the warnings given in this manual.
Please read the following carefully.
2
manufactured
from
recyclable
WARNING
R600a Refrigerant
This product contains R600a isobutane refrigerant, which is a
very eco-friendly natural gas. However, it is also
flammable. Please follow the warnings given below:
• If the product has been transported horizontally, you must
wait for 4 hours minimum before plugging it in.
• The following instructions must be followed during
installation:
• Dimensions of the installation area must be suitable.
• Dimensions, features and position of the object used to
support and fix the product to this area must be suitable.
• Minimum clearances between product parts and
surrounding structures must be suitable.
• Minimum dimensions and proper organisation of
ventilation holes must be observed.
• The product must be connected to the mains power, and
corresponding connections of other components must be
suitable.
• The product must be disconnectable from the power supply
after installation.
• The socket or fuse must be accessible to de-energise the
product.
• Extension cables or ungrounded (two-terminal) adapters
must not be used.
ATTENTION
You must wear gloves and eye protectors when installing the
product.
You must also take measures against high noise levels when
drilling the floor or using a drill.
Make sure that your product is suitable for your local mains.
The product must be installed by a qualified technician
according to the installation instructions.
WARNING
The product may tip over since it is quite heavy. For this
reason, precautions must be taken against tipping over.
The doors of the product must be kept closed until it reaches
the destination and it must be transported in accordance with
the installation instructions.
Publicidad
