Fulgor Milano FBCD 761 TNF EDBL Instrucciones De Instalación página 64

EN
IMPORTANT INFORMATION
You can use tape and similar protectors on parts you think
this is necessary to protect the edges of the furniture when
placing the product.
WARNING
The plug of the product must be accessible after installation. If
the plug is not accessible after installation, the power
must be cut off from the main switch.
Make sure that the mains cable is not jammed when placing
the product.
• Push the product carefully towards the cabin to place it. If
there is strain during the placement of the product into the
cabin:
- The floor might be rough or uneven
- Adjustable feet might be loose (please see the relevant
section to learn how to adjust the adjustable feet)
• You must attach the Freezer Door temporarily to align the
product before placing it.
You must use the upper edges of the Freezer Door when
aligning the product with the furniture. Adjustment of other
edges are explained in the following pages.
IMPORTANT INFORMATION
You must use the upper edges of the Freezer Door when
aligning the product with the furniture.
Adjustment of other edges are explained in the following
pages.
20