Fulgor Milano FBCD 761 TNF EDBL Instrucciones De Instalación página 75

• Lay down the furniture door, and place the freezer door
onto it
• Put the screws back but do not tighten
• Use the 3 screws (Item No13) to fix the bracket. the
washers(Item No12) are provided in case of need.
• Tighen the screws once the furniture door and the freezer
door is perfectly attached.
A total of 3 mm washers must be placed on the FRZ Door on
the condition that all furniture dimensions are suitable.
Washers to be used are determined based on the kitchen
design.
WARNING
You will find more Crescent Washers than you need in the
mounting box. You can use them if your kitchen design
requires so.
Installing the Fridge Furniture Door
Attach the furniture door to the fridge door.
• Use the two screws removed from here to fix onto the
adjusting bolts
EN
31