Fulgor Milano FBCD 761 TNF EDBL Instrucciones De Instalación página 65

Adjusting the height of the refrigerator
in the cabin
• Adjust the refrigerator height using the adjustable feet.
WARNING
First of all, raise the front feet to reduce the risk of the cabin
falling frontward.
A/D –Turn the key clockwise to lift the front
B/C –Turn the key clockwise to lift the rear
• After adjusting the adjustable feet, check the flatness in both
width and depth directions.
The maximum height that the adjustable feet can reach is 1
9/16" (40 mm) and the product height is 85 3/8" (2,169
mm).
IMPORTANT INFORMATION
Adjusting the refrigerator according to
the cabin flange
• For products with clad doors, the position of the Refrigerator
is adjusted so that the door and the furniture surface are
flush. You can also use gage (Item No10) if necessary.
• For products without clad doors, the product is placed using
the Adjustment part (Item No10) as shown in the figure
below.
IMPORTANT INFORMATION
It is very important to align the upper edge of the Freezer
door when aligning. All the other edges can be adjusted with
the adjustment mechanisms.
EN
21