Sauder Lateral File 107302 Instrucciones De Montaje página 10

Step 6
Fasten three ANGLE BRACKETS (Y) to the TOP (C)
å
exactly as shown. Use a 9/16" LARGE HEAD SCREW (HH)
through each ANGLE BRACKET and into the pre-drilled
holes in the TOP.
Fasten the TOP MOLDING (F) to the ANGLE BRACKETS
å
on the TOP (C). Use a 9/16" LARGE HEAD SCREW (HH)
through each ANGLE BRACKET and into the groove in
the TOP MOLDING.
NOTE: Push the TOP MOLDING against the LEFT END
å
before fastening it to the ANGLE BRACKETS. Do not
overtighten the SCREWS.
Page 10
Rounded edge
107302
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
F
C
HH
Y
www.sauder.com/services