Sauder Lateral File 107302 Instrucciones De Montaje página 14

Step 10
Press the NOTCHED FILE GLIDES (S) over the DRAWER SIDES (D357) on one of the drawers. Press the STRAIGHT FILE
å
GLIDES (R) over the DRAWER BOX FRONTS (D330). The FILE GLIDES are necessary to hang fi les.
The drawers are designed to hold letter, legal, or European-sized fi les. If you wish to hang letter or European-size fi les, use
å
the FILE CLIPS (MM) and the FILE RODS (LL). Insert the FILE ROD (LL) into each FILE CLIP and slide the FILE CLIPS onto
the NOTCHED FILE GLIDES (S) as needed. Follow the diagram.
NOTE: The letter-size fi les will hang on the FILE RODS (LL) and the NOTCHED FILE GLIDES (S).
å
If you wish to hang legal-size fi les, use the STRAIGHT FILE GLIDES (R). Hang the fi les on each STRAIGHT FILE GLIDE. If
å
desired, the drawers can hold both letter and legal-sized fi les by using only one of the FILE RODS (LL).
Fasten a DRAWER ACTUATOR (AA) to the DRAWER SIDE (D357), in the exact location shown. Use two 1/2" FLAT HEAD
å
SCREWS (II) through the exact holes shown in the BRACKET and into the pre-drilled holes in the DRAWER SIDE.
NOTE: Be sure to position the BRACKET as shown. Be sure to use the exact holes shown in the BRACKET. Follow the
å
enlarged diagram closely.
Repeat this step for the other drawer.
å
S
D357
MM
Page 14
LL
LL
R
D330
MM
R
D330
S
D357
AA
107302
II
BLACK 1/2" FLAT HEAD SCREW
(2 used in this step)
www.sauder.com/services