Sauder Lateral File 107302 Instrucciones De Montaje página 6

Step 2
Fasten the CORNER BLOCKS (O) to the corners of the
å
TOP (C). Slide the CORNER BLOCKS over the dowel ends
of the FASTENERS. Tighten the FASTENERS.
NOTE: Be sure the fl at surfaces of the CORNER BLOCKS
å
are facing up. Do not overtighten the TWIST-LOCK®
FASTENERS in the CORNER BLOCKS.
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
Page 6
O
C
107302
O
www.sauder.com/services