Sauder Lateral File 107302 Instrucciones De Montaje página 13

Step 9
Fasten two DRAWER SIDES (D357) to one of the DRAWER BOX
å
FRONTS (D330). Use two 1-1/4" FLAT HEAD SCREWS (FF)
through the holes in each DRAWER SIDE and into the holes in
the edges of the DRAWER BOX FRONT.
NOTE: Be sure the grooves in each part line up with each
å
other on the inside of the drawer.
Slide a DRAWER BOTTOM (D839) into the grooves in the
å
DRAWER SIDES and DRAWER BOX FRONT.
NOTE: Be sure the fi nished surface of the DRAWER
å
BOTTOM is facing up.
Fasten another DRAWER BOX FRONT (D330) to the
å
DRAWER SIDES (D357). Use four 1-1/4" FLAT HEAD
SCREWS (FF) through the holes in the DRAWER SIDES and
into the holes in the edges of the DRAWER BOX FRONT.
NOTE: Be sure the DRAWER BOTTOM fi ts into the groove
å
in the DRAWER BOX FRONT.
Repeat this step for the other drawer.
å
FF
www.sauder.com/services
D357
D839
D330
BLACK 1-1/4" FLAT HEAD SCREW
D330
107302
Side Step: Make
nachos. (Optional, but
recommended.)
FF
(16 used in this step)
D357
FF
Page 13