SCHEDULED MAINTENANCE TABLE
03/2013
(*)
For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more frequently if the machine is used on slopes.
(4) Or more often in dusty areas.
(5) Change the hydraulic system oil for the first time after 500 hours, then every 2,000 hours or every year.
Procedure
Battery charging
Side and main broom height check
Brake cable check and adjustment
Hopper hydraulic lifting system oil level check
Skirt height and operation check
Filter shaker operation check
Main broom driving belt check
Steering chain cleaning
Safety system operation check
Brake pad check/adjustment/replacement
Main broom driving belt check and/or replacement
Hopper gasket integrity check
Lifted hopper sensor operation check/adjustment
Motor carbon brush check and/or replacement
Hydraulic system oil change
Battery (WET) fluid level check
Hopper dust filter check and cleaning ("A" method)
Dust guard system water filter check and cleaning (optional)
Hopper dust filter check and cleaning ("B" method)
Hopper dust filter check and cleaning ("C" method)
(only for polyester dust filter)
INSTRUCTIONS FOR USE
1464818000 - SW4000
Every
Upon delivery
10
hours
(1)
(2)
Every
Every
Every
50
100
200
hours
hours
hours
(3)
(4)
(2)
(4)
(*)
(*)
(*)
(2)
(*)(3)
(4)
(*)
(*)
(*)
ENGLISH
19
Every
year
(*)
(*)(5)