Publicidad
Idiomas disponibles
Idiomas disponibles
MAIN BROOM REPLACEMENT
ENGLISH
24
WARNING!
It is advisable to wear protective gloves when
replacing the main broom because there can be
sharp debris between the bristles.
1.
Drive the machine on a level ground and engage the
parking brake.
2.
Turn the ignition key (61) to "0" and remove it.
3.
Remove the left door (13) by turning the fasteners.
4.
Unscrew and remove the knob (A, Fig. 8).
5.
Turn the levers (B).
6.
Remove the broom compartment latch (C) by grabbing it
from its fold (D).
7.
Remove the main broom (E, Fig. 9).
8.
Check that the drive hub (F) is free from dirt or foreign
materials (cords, rags, etc.) accidentally rolled up.
9.
The new main broom must be installed with the bristles
10. Install the new broom and ensure that the hexagonal mesh
11. Install the broom compartment latch (C, Fig. 8) by turning
the levers (B) and screwing down the knob (A).
12. Close the left door (13) by turning the fasteners.
13. Check and adjust the main broom height as shown in the
previous paragraph.
rows bent as shown in the figure (G).
(H) fits into the relevant drive hub (F).
INSTRUCTIONS FOR USE
SW4000 - 1464818000
Figure 8
Figure 9
B
A
F
G
H
03/2013
P100595
P100596
D
B
C
E
Publicidad
