Descargar Imprimir esta página

Nilfisk Advance SW4000 Instrucciones De Uso página 5

Ocultar thumbs Ver también para Advance SW4000:

Publicidad

Idiomas disponibles

Idiomas disponibles

UNPACKING/DELIVERY
SAFETY
OPERATION CAPABILITIES
CONVENTIONS
VISIBLE SYMBOLS ON THE MACHINE
03/2013
Forward, backward, front, rear, left or right are intended with reference to the operator's position, that is to say on the driver's seat
(3).
CAUTION!
To unpack the machine, carefully follow the instructions on the packing.
Upon delivery carefully check that the machine and its packing have not been damaged during transportation. In case of visible
Check that the machine is equipped with the following features:
Technical documents:
Sweeper Instructions for Use Manual (the present document)
Sweeper Spare Parts List
No. 1 150 A main fuse (F0)
No. 1 10 A fuse
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.
WARNING!
Carefully read all the instructions before performing any operation on the machine.
WARNING!
Do not wash the machine with direct or pressurised water jets.
WARNING!
WARNING!
Moving parts.
WARNING!
Moving parts. Danger of crushing.
WARNING!
This sweeper has been approved to clean (sweeping and vacuuming) compact and solid floors, in commercial and industrial
environments, under safe operation conditions by a qualified operator.
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.
X %
Do not use the machine on slopes with a gradient exceeding the specifications.
Parts under voltage. Presence of corrosive fluids.
INSTRUCTIONS FOR USE
1464818000 - SW4000
ENGLISH
3

Publicidad

loading