Publicidad
Idiomas disponibles
Idiomas disponibles
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to
our website:
www.fluke.com
To register your product, view, print, or download the latest manual or manual
supplement, go to our website.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206
U.S.A.
Safety Information
A Warning identifies conditions and procedures that are dangerous to the
user. A Caution identifies conditions and procedures that can cause damage
to the Product or the equipment under test.
To prevent the possibility of electric shock or personal injury:
•
Read all safety information before you use the Product.
•
Do not alter the Product and use only as specified, or the
protection supplied by the Product can be compromised.
•
Carefully read all instructions.
•
Do not use the Product if it operates incorrectly.
•
Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
•
Limit operation to the specified measurement category, voltage,
or amperage ratings.
•
Do not exceed the Measurement Category (CAT) rating of
the lowest-rated individual component of a Product, probe,
or accessory.
•
Comply with local and national safety codes. Use personal
protective equipment (approved rubber gloves, face protection,
and flame-resistant clothes) to prevent shock and arc blast injury
where hazardous live conductors are exposed.
•
Do not operate the Product with covers removed or the case
open. Hazardous voltage exposure is possible.
•
Do not use a current measurement as an indication that a circuit
is safe to touch. A voltage measurement is necessary to know if a
circuit is hazardous.
•
Remove the input signals before you clean the Product.
•
Use only specified replacement parts.
•
Have an approved technician repair the Product.
•
Do not use cable assembly if there is damage. Examine the cable
assembly for damaged insulation, exposed metal. Check cable
assembly continuity.
•
Measure a known voltage first to make sure that the Product
operates correctly.
•
Do not use the Product around explosive gas, vapor, or in damp
or wet environments.
•
Do not use the Product if it is altered or damaged.
•
Examine the case before you use the Product. Look for cracks
or missing plastic. Carefully look at the insulation around the
terminals.
•
Do not use cable assembly if they are damaged. Examine
the cable assembly for damaged insulation and measure a
known voltage.
•
Use only accessory supplied with the Product.
Fluke Europe B.V
PO Box 1186
5602 BD EINDHOVEN
The Netherlands
WX Warning
2
Publicidad
