Publicidad
Idiomas disponibles
Idiomas disponibles
6.1.2
Charge battery
1
Fig. 13
1
2
3
1
Fig. 14
1
2
3
3
Fig. 15
Translation of the original instructions / Hair clippers
1. Check the contacts of the clipper (1) and the battery
(2) for foreign particles and contamination.
2
2. Make sure that the clipper's switch lever is in the OFF
position ("0") (Fig. 4).
3. Insert the battery (2) in the clipper (3), until the inter-
lock battery (1) is engaged on both sides.
4. Insert the clipper with the inserted battery (1) or insert
just the battery (2) from above without force into the
charging bay in the charging station.
5. Waiting for the battery charging time (3 Technical
data).
6. Battery is charging. During the charging time the con-
trol light is illuminating red (3). As soon as the battery
has been charged to a min. 90%, the indicator lamp
will change to green and the charging station switch
to "trickle charging".
7. Hold the charger firmly with one hand and pull the
clipper (1) or the battery (2) out with the other.
13
Publicidad
