Heiniger SIRIUS Manual De Instrucciones página 37

8 Spare parts
See illustration spare parts at the end of this instruction manual.
WARNING!
Faulty spare parts may cause damages, malfunctions or total loss and may reduce
security. Therefore:
Only use original spare parts from the manufacturer. Purchase the spare parts at the official
X
distributor or directly at the manufacturer.
If using no original spare parts all warranty and service claims are expiring.
X
Pos. Description
No.
1 Housing shell top complete
2 Housing shell bottom com-
plete
3 Li-Ion battery 7.2 V/ 2.85 Ah
4 Motor unit BDC complete
5 Motor mount front
6 Motor mount rear
7 PCB hair clippers
8 Turning lever
9 Rubber tap
10 Seal
11 Kombitorx KA30x16 PT screw
12 Kombitorx KA30x8 PT-screw
22 Blade support
23 Blade locking red
24 Clipping pressure spring
25 Blade guidance
26 Clamp holder
27 Top blade
9 Disposal
CAUTION!
Environmental damages when disposing incorrectly!
Electronic scrap, batteries, lubricants and other indirect materials are subject to haz-
ardous waste treatment and may only be disposed of by approved specialist compa-
nies!
NOTE!
To dispose of the clipper, take it along with the charging station to a nearby service
centre or specialist shop for electronics.
Translation of the original instructions / Hair clippers
Qty. Pos. Description
No.
1x 28 Bottom blade
1x 29 Screw M3,5x4
1x 30 Charging station without pow-
er supply
1x 31 Housing charging station
1x 32 Battery clip charging station
1x 33 Fibre optics
1x 34 PCB charging station
1x 35 Charging station base plate
1x 36 Foam washer Ø 25 x 8
1x 37 Rubber foot
12x 50 Power supply with plug
1x 51 Plug EU
1x 52 Plug AU/ARG
1x 53 Plug GB
1x 54 Plug US-JP
1x 55 Plug KR
1x 56 Plug BR
1x
Qty.
1x
2x
1x
1x
1x
1x
1x
1x
1x
3x
1x
1x
1x
1x
1x
1x
1x
19