Heiniger SIRIUS Manual De Instrucciones página 34

6.2.3 Lubrication
To ensure a good haircutting result and to increase the service life of the hair clipper and the
clipper head, apply a thin coat of oil between the top and bottom blade (Fig. 24).
CAUTION!
Inadequate lubrication of the clipper head may result in overheating and reduce the
durability of the clipper and blades, along with reducing the battery life. Therefore:
Lubricate the blades sufficiently when clipping (at least every 15 minutes) to prevent them
X
from becoming dry (Fig. 24).
Only use the lubricants prescribed by the manufacturer.
X
NOTE!
Only use our special oil or a paraffin oil meeting the ISO VG 15 specification.
The provided oil is non-toxic and produces no irritation on contact with the skin or
the mucous membranes. This paraffin oil degrades to some 20% after 21 days
(CEL-L-33-T-82).
Fig. 24
CAUTION!
Remove all the leaking, used up or excessive grease from all the lubrication points, and
it is to be disposed in accordance with the local regulations.
6.2.4 Cleaning
To ensure a good haircutting result and to increase the service life of the hair clipper and the
clipper head, apply a thin coat of oil between the top and bottom blade (6.2.3 Lubrication).
Clipper head and hinge
Clean clipperheads und hinge between the different clippings.
Charger
1
Fig. 25
Contacts
Clean the battery contacts and clipper with a dry cloth as necessary.
16
The blades must be oiled before, during and after every
use. When the blades of the clipper leave stripes, oil may
be required. Place a few drops of oil ahead and laterally
on the clipper blades (see arrows). Wipe off the exces-
sive oil with a smooth, dry cloth. Lubrication sprays do
not have sufficient oil for a good lubrication, but serve
for cooling the clipping blades. Immediately change dam-
aged or crenated blades to avoid injuries.
1. Disconnect the charging station from the power sup-
ply.
2. If necessary, take away hairs from both charging cav-
ities.
3. Wipe the contacts (1) clean with a dry cloth.
Translation of the original instructions / Hair clippers