Publicidad
Idiomas disponibles
Idiomas disponibles
▶ Misuse can result in liquid escaping from the battery. Avoid contact with the liquid. Liquid escaping from
the battery can cause skin irritation or burns. If contact occurs, rinse off with water. In the event of the
liquid coming into contact with the eyes, rinse the eyes with plenty of water and consult a doctor.
Using and handling the power tool
▶ Store power tools out of reach of children when not in use. Do not allow persons who are not familiar
with the tool or these instructions to operate it. Power tools are dangerous in the hands of inexperienced
persons.
▶ Take good care of the power tool. Check that moving parts operate satisfactorily and do not jam, and
make sure that no parts are broken or damaged in such a way that the power tool might no longer
function correctly. Have damaged parts repaired before using the tool. Many accidents are caused by
poorly maintained power tools.
▶ Use power tools, accessories, insert tools, etc. in accordance with these instructions. Take the working
conditions and the work to be performed into account. Use of power tools for applications other than
those intended can result in hazardous situations.
▶ Use the right power tool for the job. Do not use the power tool for purposes for which it was not intended.
Use it only as directed and when in faultless condition.
▶ Operate the vacuum cleaner only with the filter installed.
▶ Avoid unintentional starting. Switch the power tool off before inserting the battery and before lifting or
transporting the power tool. Never carry the power tool with your finger on the on/off switch. Always
remove the battery when the power tool is not in use, before maintenance, before changing accessory
tools and in preparation for and throughout transport.
▶ Do not use the vacuum cleaner as a seat or as a step.
▶ When fitting the suction head on to the vacuum cleaner, take care to avoid pinching your fingers.
Service
▶ Have the power tool repaired only by a qualified specialist using only genuine Hilti spare parts. The safety
of the power tool can thus be maintained.
2.3
The material vacuumed up
▶ Do not use the vacuum cleaner to vacuum up hazardous dusts of a dust class higher than the
dust class for which the vacuum cleaner is rated. Do not use the vacuum cleaner to vacuum up
flammable and/or explosive dusts (e.g. magnesium or aluminum dust). Do not use the vacuum
cleaner to vacuum up materials hotter than 60 °C (140 °F) (e.g. glowing cigarettes, hot ash).
▶ Before starting work, always check the hazard class of harmful dust that can be produced in working
operations. Materials harmful to health such as asbestos and lead are explicitly not included in the
intended use of the product and working with them is not permitted → page 25. If you work with materials
containing lead or asbestos nevertheless, the manufacturer's warranty for your product is voided.
▶ Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some
examples are: lead or lead-based paints; brick, concrete and other masonry products, natural stone
and other products containing quartz; certain types of wood, such as oak, beech and chemically
treated wood; asbestos or materials that contain asbestos. Determine the exposure of the operator and
bystanders by means of the hazard classification of the materials to be worked. Implement the necessary
measures to restrict exposure to a safe level, for example by the use of a dust collection system or by
the wearing of suitable respiratory protection. The general measures for reducing exposure include:
▶ working in an area that is well ventilated,
▶ avoidance of prolonged contact with dust,
▶ directing dust away from the face and body,
▶ wearing protective clothing and washing exposed areas of the skin with water and soap.
▶ Do not use the appliance to vacuum up flammable, explosive or aggressive liquids (coolants and
lubricants, gasoline, solvents, acids (pH < 5), alkalies (pH > 12.5), etc.).
▶ Switch the vacuum cleaner off immediately if foam or liquids escape from it.
▶ Wear protective gloves when using the appliance to vacuum up hot materials at temperatures up
to 60 °C (140 °F).
▶ When working with mineral drilling slurry, wear protective clothing and avoid skin contact with the
slurry (pH > 9: caustic).
▶ Avoid contact with alkaline or acidic liquids. If contact accidentally occurs, rinse with water. In
the event of the liquid coming into contact with the eyes, rinse the eyes with plenty of water and
consult a doctor.
*2330315*
2330315
English
23
Publicidad
