Keysight U1251B Guia Del Usuario página 104

4 Changing the Default Setting
Selecting Setup Mode
To enter the Setup mode, perform the following steps:
1 Turn the meter OFF.
2 From the OFF position, press and hold
NOTE
When you hear a beep, the meter is in Setup mode and you can release
To change a menu item setting in Setup mode, perform the following steps:
1 Press
2 Press
3 Press
4 Press
102
any non-OFF position.
or to scroll through the menu items.
or to scroll through the available settings. See
"Available setting options in Setup mode," for details of available options.
to save changes. These parameters will remain in the
non-volatile memory.
for more than 1 second to exit Setup mode.
Keysight U1251B and U1252B User's and Service Guide
while turning the rotary switch to
Table
.
4-1,