Keysight U1251B Guia Del Usuario página 60

2 Making Measurements
A (ampere) measurement
Set up the multimeter to measure A (ampere) as shown in
test points and read the display.
Connect the red and black test leads to the 10 A input terminal A and COM
NOTE
respectively. The meter is set to A measurement automatically when the red test
lead is plugged into the A terminal.
Figure 2-5
58
A (ampere) current measurement
Keysight U1251B and U1252B User's and Service Guide
Figure
Black Lead
Red Lead
2-5. Probe the