Keysight U1251B Guia Del Usuario página 93

Interval logging
Firstly, ensure that interval (time) logging is specified in Setup mode.
1 Press
The maximum data that can be stored is 200 entries. When the 200 entries are
NOTE
filled, "FULL" is indicated on the secondary display.
2 Press
When interval (automatic) logging is enabled, all keypad operations are
NOTE
disabled, except for the Log function.
Keysight U1251B and U1252B User's and Service Guide
for more than 1 second to store the present value and function
on the primary display into the non-volatile memory. The
logging index will be indicated. The readings are automatically saved into the
permanent memory at intervals set using the Setup mode.
for more than 1 second to exit this mode.
Functions and Features
and the
3
91