Keysight U1251B Guia Del Usuario página 35

The display at a glance
To view the full display (with all segments illuminated), press and hold
button while turning the rotary switch from OFF to any non-OFF position. After you
are done viewing the full display, press any button to resume normal functionality
based on the rotary switch position. This is followed by a wake-up feature.
The meter will then enter power save mode once auto power off (APF) is enabled.
To wake the meter up:
1 Turn the rotary switch to OFF position then ON again.
2 Press any button for rotary switch position that is not at square wave output
3 To set the rotary switch at square wave out position, press only the Dual, Range
The LCD signs are explained in the following tables.
Figure 1-8
Keysight U1251B and U1252B User's and Service Guide
position. (U1252B only)
and Hold buttons or turn the rotary switch to another position. (U1252B only)
Display symbols
Getting Started
33
1